Security Function Ver. 1.02 Jul. 2010
5.
Checking the firmware version number
• Confirm the need to enhance or not to enhance the security function with the administra-
tor of this machine: If administrator wants to enhance, check the firmware version num-
ber and the checksum value.
• If the firmware version number of this machine is different from numbers shown in the list
below, it will be necessary to re-write to the firmware version corresponding to security.
Refer to P.28 for the method of how to re-write the firmware.
5.1
Security authentication firmware version number
bizhub C360/C280/C220
Refer to P.12 for the method of checking the firmware version.
6.
Accessing the Service Mode
6.1
Access method to the Service Mode
1. Press the Utility/Counter key.
2. Touch [Meter Count].
3. Touch [Check Details] on Meter Count display.
4. Press the following keys in this order:
Stop00 Stop 0 1
5. Enter the CE Password.
NOTE
• Authentication using the CE Password is carried out only if "ON" is set for
[CE Authentication] as accessed through [Service Mode] [Enhanced Security].
NOTE
• The CE password entered is displayed as "✱."
• NEVER forget the CE password. When forgetting the CE password, call responsi-
ble person of KMBT.
5. Checking the firmware version number
MFP Controller Ver.
A0ED0Y0-0100-GM0-31
Check Sum
111A
A0EDS1E021DA
3