Requests To The Administrator - Konica Minolta bizhub C280 Service Manual

Security Function Ver. 1.02 Jul. 2010
7.2.2

Requests to the administrator

• The administrator must perform or check the following settings.
Item
Administrator Password
Encryption Key
User Authentication
Prohibit Functions When
Auth. Error
PSWC Settings
OpenAPI Access Setting
TCP Socket
FTP Server Setting
SNMP v1/v2c Setting
SNMP v3(IP)
NOTE
• If the administrator of the machine registers a new Encryption Key be sure first to
perform [Physical Format] by accessing [Service Mode]  [State Confirmation] 
[HDD Format].
Setting/Check
Check that the password meets the requirements
of the Password Rules.
Setting of encryption key.
Check that "External Server (Active Directory
only)" is set.
Check that Prohibited Functions When Authenti-
cation Error has been set to [Mode2] by the
administrator of the machine.
Check that "OFF" is set.
Check that "Restrict" is set.
Check that "OFF" is set.
Check that "OFF" is set.
Check that Write setting is set to "Invalid".
Check that "OFF" is set.
7. Enhancing the security function
Default Setting
1234567812345678
No setting
Not authenticated
Mode 1
ON
Allow
ON
ON
Valid
ON
11