Using The Tools - Bissell Trilogy® Vacuum User Manual

O
perations

using the tools

attach desired tool to hose for above floor
cleaning surfaces or hard to reach areas.
1. Remove Hose: With vacuum in upright
position, remove hose end from the suction
inlet near the bottom of the vacuum by the
wheel. Do not remove "tabbed" end of
hose connected to the clear tank.
2. Attach tools by firmly pushing onto vacuum
hose or extension wand.
2a. Dusting brush: Use brush side to dust
furniture, blinds, lamps, shelves, and
baseboards. 81M9 model only.
2b. Crevice Tool: Use in tight narrow spaces
2c. Extension Wand: Use with desired
attachment for longer reach.
2d. TurboBrush ® Tool: Use rotation brush
action for small flat areas such as
stairs,and furniture. Press gently down
and pull towards you in raking motion,
too much pressure will cause brush to
stop rotating.
note: Model 81M9-1 comes
with the pet turbobrush ® tool
and follows same operation
instructions.
2e. Pet Contour Tool ® (Included with 81M9-
1 only): Use to reach into corners and
edges on stairs as well as armrests and
other curved surfaces. The tool can be
flipped to use in any direction.
w w w . b i s s e l l . c o m
2
a.
b.
c.
d.
e.
8 0 0 . 2 3 7 . 7 6 9 1
9