Using The Vacuum; Attaching Tools For Hand Vac Use - Bissell ICONpet PRO 2746 Series Quick Start Manual

Using the Vacuum

Looking for more guidance? Go to support.BISSELL.com for tips and 24-7 support while
cleaning.
ICONpet Cordless can be used as a stick vacuum, hand vacuum or for extended reach with hand
vacuum + wand.
1.
Press the Power Button to
begin cleaning and to turn OFF
the machine when finished
cleaning.

Attaching Tools for Hand Vac Use

Go to support.BISSELL.com for additional how-to videos.
Clean stairs or furniture easily with the tools provided. Pair your desired tool with the hand vacuum
or extension wand. Go to support.BISSELL.com for tips on above floor cleaning tools.
1.
To use as a hand vacuum,
press the release button
to disconnect it from the
extension wand.
WARNING
2.
Press the Cleaning Mode Button to toggle between the
three settings:
•••
Recommended for maximum suction. It's the most powerful
setting which is great for cleaning carpets, however has the
shortest run time. This is the default suction mode when the
vacuum is turned ON.
••
Recommended for everyday cleaning. It's great for hard
floors, low pile carpets and area rugs. It balances power and run
time.
•
Recommended for the longest run time. It's great for hard
floors and offers the quietest sound.
2.
Attach your chosen tool.
Do not use your vacuum until you are familiar with all instructions and operating procedures.
3.
Use the tool to clean
furniture, stairs or other
surfaces in your home.
BISSELL.com 7