Gateway MX6708 Hardware Reference Manual page 50

CHAPTER 3: Maintaining and Upgrading Your Notebook
46
Gently lift the back edge of the keyboard.
14
If the keyboard does not lift, go to
■
If the keyboard lifts, go to
■
Close the LCD panel, turn your notebook over so the bottom is facing up,
15
then loosen the six memory bay cover screws (these screws cannot be
removed).
Use the thumb notch to lift the memory bay cover, then remove it. Be
16
careful not to break off the tabs located on the end of the cover opposite
of the thumb notch.
Loosen the mini-PCI bay cover screw (this screw cannot be removed), then
17
remove the mini-PCI bay cover.
www.gateway.com
Step
Step 20.
Screws
15.