Gateway MX6708 Hardware Reference Manual page 43

www.gateway.com
Tips & Tricks
The screw hole is marked with a K.
Disconnect all peripheral devices connected to the notebook and remove
5
any PC cards.
Turn your notebook over so the bottom is facing up, then remove the main
6
battery and optional secondary battery. For more information, see
"Changing batteries" on page
Remove the keyboard screw.
7
Loosen the six memory bay cover screws (these screws cannot be
8
removed).
Use the thumb notch to lift the memory bay cover, then remove it. Be
9
careful not to break off the tabs located on the end of the cover opposite
of the thumb notch.
Adding or replacing memory modules
33.
Screws
Screw
39