Boot Option Priorities; Boot Override - Asus MAXIMUS IV EXTREME-Z User Manual

Bootup NumLock State [On]
[On]
[Off]
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Wait for 'F1' If Error [Enabled]
When set to [Enabled], the system waits for the <F1> key to be pressed when error
occurs.
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current] The third-party ROM messages will be displayed only if the third-
Setup Mode [Advanced Mode]
[Advanced Mode]
[EZ Mode]

Boot Option Priorities

These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
•
•

Boot Override

These items displays the available devices. The number of device items that
appears on the screen depends on the number of devices installed in the system.
Click an item to start booting from the selected device.
3-36
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
Enables the full screen logo display feature.
Disables the full screen logo display feature.
The third-party ROM messages will be forced to display during the
boot sequence.
party manufacturer had set the add-on device to do so.
Sets Advanced Mode as the default screen for entering the
BIOS setup program.
Sets EZ Mode as the default screen for entering the BIOS setup
program.
To select the boot device during system startup, press <F8> when ASUS
Logo appears.
To access Windows OS in Safe Mode, do any of the following:
- Press <F5> when ASUS Logo appears.
- Press <F8> after POST.
Chapter 3: BIOS setup