CHAPTER 14: Troubleshooting
162
To check the signal strength of your wireless network:
Click Start, right-click My Network Places, then click Properties.
1
The Network Connections window opens.
Right-click Wireless Network Connection, then click Status. The
2
Wireless Network Connection Status dialog box opens. The meter
shows the signal strength for wireless networking on your
computer if other computers with the same network name are
within range of your computer.
You are in a wireless network, you can see the network, but cannot
communicate, send files, print, or get to the Web
If your access point uses WEP, go to the Windows XP Wireless Networking
■
Properties window and make sure that both the WAP and the WLAN in the
computer have matching WEP keys.
You are in a wireless network, but no available networks are listed in the
Windows XP Wireless Networking utility
If the network you are attempting to access does not broadcast its SSID,
■
you need to request the SSID from the administrator and add that
network's information into the wireless utility.
You may want to try entering ANY as the SSID, which will make the
■
computer try to auto-detect the network.
Your wireless network is listed as a preferred network, but it has an "x" on
it
An x means your preferred network is not currently available or you are
■
not currently in range to connect.
Internet Explorer is unable to access the Internet
Reset the power on your cable or DSL modem and your access point. This
■
reestablishes communication between your Internet Service Provider and
your modem and between your modem and your access point.
If you previously accessed the Internet through a dial-up modem, Internet
■
Explorer may not be set up to access the Internet through a network.
www.gateway.com