Eizo FlexScan L360 User Manual page 56

Setup Procedure
(1) Select the "Off Timer" icon and press the Enter button to display
"Off Timer" select menu.
(2) Select "Enable" and press the enter button.
(3) Press the right/left key to adjust how long (1 to 23 hours) the monitor
should be in the "On Period". Then, press the enter button to return to
the "others" menu.
(4) Select the "Exit" icon and push the Enter button to exit the
ScreenManager.
Advance notice (beep with LED flashing green) will be given 15 minutes
before the monitor will automatically turn off and enter the "Power Off"
modes . To turn off the beeper, see page 57.
To Delay Entering Power Off
To delay entering the "Power Off" mode, press the power button on the
front panel located to the left of the LED light during the advance
notice period. The monitor will continue to operate for an additional 90
minutes. There will be another advance notice for 15 minutes as
described. Delayed entrance into the "Power Off" period can be
extended as many times as desired.
(Example)
Operation Mode
Power Off
Main Power Off
56
2 USING THE SCREENMANAGER
12 hrs.
Advance
Notice
mode
Advance
Press the
Notice
Main Power
on
12 hrs.
15 min.
End of
"On Period" Press the
Power Button
(1) LED Solid Green
(2) LED Flashing Green
2 Beeps every 15
seconds
(3) LED Flashing Yellow
90 min.
15 min.
Advance
Advance
Notice
Notice
mode
mode
Advance
Advance End of
Notice
"On Period"
Notice
Press the
Power Button