Eizo FlexScan L360 User Manual page 25

Macintosh
Please connect the optional Macintosh adapter to the PC before
attaching the signal cable.
(8) Plug the power cord into the power unit, and plug the other into a
power outlet.
• In case of setting the plural free mount type monitors, please be sure to
observe the followings.
*Do not pile the power units.
*Set the power units at minimum intervals of 20 mm. Refer to the
diagram below.
(9) Turn on the monitor's main power and then switch on the PC power.
(10) This completes the installation. Turn off the main power when you
finish using it.
• Do your part to conserve energy, turn off the monitor when you are
finished using it.
20 mm
OK
Macintosh
25
1 INSTALLATION
E