Eizo FlexScan L360 User Manual page 41

* In the case of the percentage color flickering between orange and
white, please note that this is not an error but actually the most
optimum adjustment point.
* The brightness of the entire screen is controlled by changing the
"Brightness" controls. No contrast adjustment is required except when
the graphics board or the resolution is changed from the previous one.
6. Brightness Adjustment
This feature controls the brightness of the screen. The brightness of the
entire screen is controlled by changing the brightness of the backlight.
The black area on the screen is produced by shielding the backlight.
Therefore, when changing the brightness of the backlight, the brightness of
the black area on the screen will change very little.
2 USING THE SCREENMANAGER
E
41