Eizo FlexScan L360 User Manual page 26

Connecting two PCs to the Monitor
(Example)
PC compatible
The EIZO L360 has two video input signal connectors (2 x D-sub mini 15
pin). The priority switch system allows the user to assign priority to either
input signal.
• Use the specified optional cable: MD-C91 only or with Macintosh
adapter when connecting the second computer to the monitor.
• Contact EIZO dealers for information about optional cables.
• Be sure that the monitor and the PC are both switched off before
connecting them.
• Be sure to connect the cable securely.
Selecting the Active Input
• The Input signal selection button on the front panel can be used to select
Signal 1 or Signal 2 as the active input.
• The ScreenManager "Input Priority" setting (in the "Others" menu) can
be used to set up the automatic selection of the input. See page 54 for
details.
26
1 INSTALLATION
Apple
Macintosh
MD-C91
Input signal selection button
Macintosh Adapter
DSCR-153 (optional)