Table of Contents
Advertisement
Windows
Your machine supports the following Windows operating systems.
REQUIREMENT (RECOMMENDED)
OPERATING
SYSTEM
CPU
Windows
Pentium II 400 MHz
2000
(Pentium III 933 MHz)
Windows XP
Pentium III 933 MHz
(Pentium IV 1 GHz)
Windows
Pentium III 933 MHz
Server 2003
(Pentium IV 1 GHz)
Windows
Pentium IV 3 GHz
Vista
Windows
Pentium IV 1 GHz
Server 2008
(Pentium IV 2 GHz)
•
Internet Explorer 5.0 or higher is the minimum requirement for all
Windows operating systems.
•
Users who have an administrator right can install the software.
•
Windows Terminal Services is compatible with this machine.
Macintosh
REQUIREMENTS (RECOMMENDED)
OPERATING
SYSTEM
CPU
Mac OS X
•
Intel
10.4 or lower
Processors
•
PowerPC G4/
G5
Mac OS X
•
Intel
10.5
Processors
•
867 MHz or
faster Power
PC G4/ G5
FREE HDD
RAM
SPACE
64 MB
600 MB
(128 MB)
128 MB
1.5 GB
(256 MB)
128 MB
1.25 GB to
(512 MB)
2 GB
512 MB
15 GB
(1024 MB)
512 MB
10 GB
(2048 MB)
FREE HDD
RAM
SPACE
•
128 MB for a
1 GB
PowerPC based
Mac (512 MB)
•
512 MB for a
Intel-based Mac
(1 GB)
512 MB (1 GB)
1 GB
Getting started_ 26
Linux
ITEM
Operating
RedHat 8.0, 9.0 (32bit)
system
RedHat Enterprise Linux WS 4, 5 (32/64bit)
Fedora Core 1~7 (32/64bit)
Mandrake 9.2 (32bit), 10.0, 10.1 (32/64bit)
Mandriva 2005, 2006, 2007 (32/64bit)
SuSE Linux 8.2, 9.0, 9.1 (32bit)
SuSE Linux 9.2, 9.3, 10.0, 10.1, 10.2 (32/64bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64bit)
Ubuntu 6.06, 6.10, 7.04 (32/64bit)
Debian 3.1, 4.0 (32/64bit)
CPU
Pentium IV 2.4GHz (IntelCore2)
RAM
512 MB (1024 MB)
Free HDD space
1 GB (2GB)
INSTALLING USB CONNECTED MACHINE'S
DRIVER
A locally connected machine is a machine directly attached to your
computer using the USB cable. If your machine is attached to a network,
skip the following steps below and go on to installing network connected
machine's driver. (See "Installing network connected machine's driver" on
page 32.)
Selecting Custom installation allows you to choose programs to
install.
Only use an USB cable no longer then 3m (118 inch. ).
Windows
You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a
machine directly connected to your computer. All components necessary for
machine operations will be installed.
1. Make sure that the machine is connected to your computer and powered
on.
If the "New Hardware Wizard" window appears during the
installation procedure, click
to close the window, or click Cancel.
2. Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation window
appear.
•
If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your drive. Click OK.
•
If you use Windows Vista, click Start > All programs > Accessories
> Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your drive and click OK.
•
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
REQUIREMENTS
in the upper right corner of the box
Advertisement
Table of Contents
