GE JV367HWW Owners And Installation Manual page 13

SCREW IN PART WAY
14
Drive a mounting screw (from the hardware packet)
part way into each center of the narrow neck of the
keyhole slots marked on the cabinet bottom.
OPTIONAL POWER CORD
15
An optional Power Cord Connection Kit, model
GE supplier for installation using a standard
3-prong, grounded wall outlet. Follow the
Installation Instructions packed with the kit to
connect the power cord to the range hood.
C L
7
3 4
NOTE: If using optional Power Cord Kit JXHC1, feed
the power cord through the hole in the top cabinet
cord and tie away with a suitable tape or tie.
FEED IN WIRES
16
Lift the hood into position and feed the house wiring
through the wiring knockout.
Installation Instructions
Cabinet
3-prong
wall outlet
(if using cord
connection)
1
1 4
1 dia. clearance hole
3 4
for optional power
supply location
13
SECURE HOOD
17
Slide the hood back against the wall. Tighten the
mounting screws. Be sure the screw heads are in
the narrow neck of the keyhole slot.
NOTE: DO NOT PUSH ON THE FAN BLADE. Pushing on
the blade may cause it to interfere with other hood
parts.
CONNECT DUCTWORK TO HOOD
(Ducted installations only)
On 7 round installations, attach the 7 duct
with sheet metal screws through the holes in the
alignment ears.
Attachment ear tabs
Use duct tape to make joints secure and airtight.
Duct tape
Mounting
screw (4)
Keyhole (4)
7 round duct