GE JV367HWW Owners And Installation Manual page 11

FOR 3-1-4 X 10 RECTANGULAR
DUCTED DISCHARGE INSTALLATIONS
ONLY:
Attach exhaust adaptor/damper over the appropriate
knockout opening (for vertical or horizontal, depending
sure damper pivot is nearest to top/back edge of hood.
Remove tape from damper flap.
(vertical discharge position)
Pivot
(depending on
installation)
FOR 7 ROUND VERTICAL DUCTED
9
DISCHARGE INSTALLATIONS ONLY:
Bend up the duct alignment ears in preparation for
later attachment of the 7 duct.
Attachment ear tabs
Installation Instructions
Tape
(horizontal discharge position)
FOR RECESSED-BOTTOM CABINETS
10
ONLY
(minimum thickness
• If the cabinets have front, side or back trim, make
the width of the inner recessed cabinet bottom. Attach
them to the cabinet bottom recess on both sides. See
Step 11 for marking locations.
11
Wood shims
thick and cut to fit