Subwoofer Level; Audio Delay - Denon AVR-1613 Owner's Manual

Subwoofer Level

Sets the subwoofer on/off and its output level.
Setting items
Subwoofer On : The subwoofer is used.
Turn subwoofer output on Off : The subwoofer is not used.
and off.
NOTE
This can be set when the sound mode is "DIRECT"
the "Subwoofer Mode" (vpage 94) is "LFE+Main".
Subwoofer Level –12dB – +12dB (0dB)
Set the subwoofer output
level.
Restorer
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The "Restorer"
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
Setting items
Restorer Off : Do not use "Restorer".
Set the mode for Mode1 (High) : Optimized mode for compressed sources with very weak
"Restorer". highs (64 kbps and under).
Mode2 (Middle) : Apply suitable bass and treble boost for all compressed
sources (96 kbps and under).
Mode3 (Low) : Optimized mode for compressed sources with normal
highs (96 kbps and over).
• This item can be set with analog signals or PCM signal (Sample rate =
44.1/48 kHz) is input.
• "Restorer" settings are stored for each input source.
• This item default setting for "NETWORK" and "iPod/USB" is "Mode3
(Low)". All others are set to "Off".
• This cannot be set when the sound mode is set to "DIRECT".
DVD DVD
Default settings are underlined.
Setting details
(vpage 64) and
Setting details

Audio Delay

While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" (vpage 87) is set to
"On" and when a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
Volume
Set the volume setting.
Setting items
Scale 0 – 98 : Display in the range 0.5 (Min) to 98.
Set how volume is –79.5dB – 18.0dB : Display ---dB (Min), in the range –79.5 dB to 18.0 dB.
displayed.
The "Scale" setting is applied also to the "Limit" and "Power On
Level" display method.
Limit Off : Do not set a maximum volume.
Make a setting for 60 (–20dB) / 70 (–10dB) / 80 (0dB)
maximum volume.
Power On Level Last : Use the memorized setting from the last session.
Define the volume setting Mute : Always use the muting on condition when power is turned on.
that is active when the 1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.
power is turned on.
Mute Level Full : The sound is muted entirely.
Set the amount of –40dB : The sound is attenuated by 40 dB down.
attenuation when muting –20dB : The sound is attenuated by 20 dB down.
is on.
83
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
Audio