Front Display - Denon AVR-1613 Owner's Manual

Language
Set the language for display on the menu screen.
English / Español
"Language" can also be set by the following procedure. However, the menu screen is not displayed.
Following the display content to make the setting.
TUNER PRESET CH +
1. Press and hold the main unit's
"V.Format:< NTSC >" appears on the display.
DIMMER
2. Press the main unit's and set "Lange.:< ENGLISH >".
SOURCE SELECT 0 1
3. Use the main unit's
STATUS
4. Press the main unit's to complete the setting.
Quick Sel.Names
Change the "Quick Select" display title to one you prefer.
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
• Up to 16 characters can be input.
• For character input, see page 79.
DVD DVD
Default settings are underlined.
Setting details
STATUS
and for at least 3 seconds.
and set the language.
Setting details
Auto Standby
When you do not perform any operation on this unit with no audio or video input for a specified time,
this unit automatically enters the standby mode. Before it enters the standby mode, "Auto Standby" is
displayed on the display of this unit and the menu screen.
30min : The unit goes into standby after 30 minutes.
60min : The unit goes into standby after 60 minutes.
Off : The unit does not go into standby automatically.

Front Display

Adjust the display brightness of this unit.
Setting items
Dimmer Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
Off : Turns the display off.
Buttons on the main unit can be used for operations.
Each time
below.
NOTE
When "Dimmer" is set to "Off", the display turns off and appears as if
there is no electricity.
102
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
DIMMER
is pressed, the setting is changed as shown
Bright Dim
Off Dark
General