Changing the Color and Shooting
Select Y.
Follow Step 1 on p. 59 to select Y.
●
Press the l button.
●
The unchanged image and the Color
Swap image will both display.
●
The default setting is to change green to
gray.
Specify the color to be swapped.
●
Position the center frame so it is filled with
the color you want and press the q button.
The specified color will be recorded.
Specify the target color.
●
Position the center frame so it is filled with
the color you want and press the r button.
The specified color will be recorded.
Specify the range of colors to be
swapped.
Press the op buttons or turn the  dial
●
to adjust the range of colors affected.
●
Select a negative value to limit the range
of colors. Select a positive value to extend
the range of colors to similar colors.
Pressing the l button accepts the
●
setting and restores the shooting screen.
101