Setting Up; Turning The Power On/Off; Setting The Volume; Using Headphones - Yamaha P-35 Owner's Manual

Setting Up

Turning the Power On/Off

1 Connect the AC power adaptor to the DC IN jack.
WARNING
• Use only the specified adaptor (page 16). Using the
wrong adaptor can result in damage to the instrument
or overheating.
2 Plug the AC power adaptor into an AC outlet.
3 Press the [
] (Standby/On) switch to turn on the
power.
The power lamp located to the left of the [
(Standby/On) switch lights up. To turn off the
power, press this switch again.
CAUTION
• Even when the [ ] (Standby/On) switch is in standby
status (power lamp is off), electricity is still flowing to
the instrument at the minimum level.
When you are not using the instrument for a long time,
make sure you unplug the power cord from the wall AC
outlet.
1
AC power
adaptor
IMPORTANT
• Note that the power is automatically turned off if this
instrument is not operated for 30 minutes. For details,
see page 14.

Setting the Volume

When you start playing, use the [MASTER VOL-
UME] slider to adjust the volume of the entire key-
board sound.
Decreases.
]
2
AC outlet
3
Increases.

Using Headphones

Any pair of stereo headphones with a 1/4" stereo
phone plug can be plugged in here for convenient
monitoring. The speakers are automatically shut off
when a plug is inserted into this jack.
Standard stereo
phone plug
CAUTION
• To protect your hearing, avoid listening with the head-
phones at a high volume level for long periods of time.

Using a Footswitch

The [SUSTAIN] jack is for connecting the included
footswitch, which works in the same way as a damper
pedal on an acoustic piano. Also an optional FC3 foot
pedal or FC4/FC5 footswitch can be connected to this
jack. The FC3 lets you use the Half Pedal function.
Half Pedal function
If you are playing the piano with sustain and want a
clearer, less muddled sound (especially in the bass
register), let up on your foot from the pedal to half
position or higher.
NOTE
• Do not press the footswitch when turning the power on. Doing this changes
the recognized polarity of the footswitch, resulting in reversed footswitch
operation.
• Make sure that power is OFF when connecting or disconnecting the foot-
switch or pedal.
7
P-35 Owner's Manual