Setup; Component Names & Functions; Control Panel - Yamaha DTX700 Owner's Manual

Setup

Component Names & Functions

Control Panel

q
q [PHONES] volume knob (page 13)
This knob controls the volume of audio output from the
[PHONES] jack. Turn clockwise to increase the volume
or counter-clockwise to decrease it.
w [MASTER] knob (page 19)
This knob controls the DTX700 master volume (i.e.,
the volume at the OUTPUT jacks). Turn clockwise to
increase the volume or counter-clockwise to decrease
it.
e Display (page 29)
This LCD screen shows information and data needed
to operate the DTX700.
r Dial (page 17)
This dial can be both turned and pressed.
• By pressing it, you can set parameter values and
execute various functions such as the storing of
data.
• By turning it, you can move the cursor within dis-
played pages and change the currently selected
parameter value.
10
DTX700 Owner's Manual
w
e
y
@0
o
!2
!5
r
u
!0
!1
!4
!3
!8
!7
!6
t
(Standby/On) button (page 14)
Use this switch to turn your DTX700 on and off.
y [F1], [F2], and [F3] function buttons (page 18)
These buttons are used to access a range of different
functions depending on the page displayed.
u [EXIT] button
Press this button to cancel operations such as the
copying and storing of data. In addition, you can
immediately silence all voices at any time by holding
down the [SHIFT] button and pressing the [EXIT] but-
ton.
i [STORE] button (page 21)
This button is used to store settings and other data in
the DTX700's internal memory. In addition, it will light
up whenever parameter settings have been changed
but not yet stored.
o [KIT] button (page 25)
This button is used to access the Kit page in order to
select a drum kit.
t
i
!9