5
Press the [STORE] button.
If you do not wish to store your settings, press the [EXIT]
button to return to the previous page.
6
Press the dial to store your new settings.
Performing on Many Different Kits
Switching the Display Mode
Normally, your DTX700's display shows the name of the kit
and an artist's impression of what it might look like. As
described below, however, you can change the display mode to
show just the kit name.
1
Press the [KIT] button.
2
Hold down the [SHIFT] button and press the
[F3] button (Display).
The display mode will now change to show just the kit
name.
NOTE
• If you wish to return to the original display mode, hold
down the [SHIFT] button and press the [F3] button (Dis-
play) once again.
Basic Operation
29
DTX700 Owner's Manual