Yamaha DTX500 Owner's Manual page 29

on ................... Each time the pad is hit, either a MIDI Key
On or MIDI Key Off event will be transmitted
alternately.
off................. Normal operation. When a pad is hit, only a
MIDI Key On event will be transmitted. After
the decay time elapses, a Key Off event will
be transmitted automatically.
on
* When this is set to " ," you should also set the Key Assign
high
Mode to " " in the KIT15 page.
13
Set the Cross Fade
This determines the Velocity Cross Fade between the layer
˙ ¶
voices and .
* This setting affects both layers
not shown in the upper right corner of the display.
>
Use the [ ] button to call up the KIT13 page, then rotate the
jog dial to set the Cross Fade type.
KIT13*~äkick
"~~VelXFade=0~~‚
● Cross Fade Type
0 .........Cross Fade function is not in effect.
˙ ¶
1
¶
˙
2
˙ ¶
3
˙
¶
4
¶
˙
5
Vertical axis: Balance between layers
Horizontal axis: Velocity
˙
Layer
¶
Layer
˙ ¶ ˙/¶
and . The indication is
˙ ¶
6
˙ ¶
7
˙ ¶
8
˙
¶
9
˙ ¶
and
7 Create Your Own Original Drum Kit
14
Set the Alternate Group
This function allows you to assign different voices to the
same alternate group, so that the playing of one sound in the
group will automatically cancel others in the same group. A
practical example of this is with the open and closed hi-hat
voices. When you play an actual hi-hat—first open, then
closed—the closed hi-hat naturally mutes the ringing open
sound. Likewise, when the open and closed hi-hat voices are
assigned to the same alternate group, the playing of one
mutes the other.
* This setting has no affect on two-layer input sources. The
indication is not shown in the upper right corner of the dis-
play.
>
Use the [ ] button to call up the KIT14 page, then rotate the
jog dial to set the Alternate Group.
KIT14*~äkick
"~AltGrp=off~~~‚
off .................No cancellation
HH~pad ..........For the voice (ühhOp, ühhOpE, etc.) that is
played when the hi-hat pad is hit.
HH~pdl ..........For the voice (ühhFtCl, ühhSplsh,
ühhCl, ühhClE, etc.) that is played when
the hi-hat pedal is pressed.
1–9..................Alternate group number. Assigns the same
group number for voices that you do not want
to be output simultaneously.
15
Set the Key Assign Mode
This defines the sound output rules when multiple voices that
are assigned to the same MIDI note number are simulta-
neously output.
* This setting affects both layers
not shown in the upper right corner of the display.
>
Use the [ ] button to call up the KIT15 page, then rotate the
jog dial to set the key assign mode.
KIT15*~äkick
"KeyAssign=semi‚
poly ...............Voices are output simultaneously.
semi ...............Up to three voices for this note number can
be produced at one time. When a fourth voice
is triggered, one of the first two voices will be
muted (cancelled).
mono ...............One voice can be delivered at one time, and
the previous voice will be muted (cancelled).
high ...............One voice can be delivered at one time, and
the previous voice will be muted (cancelled).
However, even if the maximum number of 32
notes is exceeded, the note number selected
here will not be muted.
˙/¶
˙ ¶ ˙/¶
and . The indication is
29
DTX500 Owner's Manual