Using The Timer Play - Yamaha disklavier DKC-850 Operation Manual

2
Press [+/YES] and [–/NO] to change the audio pan.
=CD=
AudioPan=Left
The following pan settings are available:
Option Description
Left Audio of the L channel is output to both of the L and R
channels.
Center Audio of the L channel is output to the L channel, and the
R channel is output to the R channel.
Right Audio of the R channel is output to both of the L and R
channels.

Using the Timer Play

[SETUP] "TimerPlay"
You can program your Disklavier to start or stop playback of a song at
various specified times. All you need to do is register up to a maximum of
99 timer settings, and your Disklavier will perform them unattended. This
function is called "timer play."
The following describes how to play back the first album in the internal
flash memory at 8:15 AM.
1
Press [SETUP] on the remote control.
The setup menu screen appears.
=SETUP MENU=
*TimerPlay
*MIDI
-+ENT
(1/3)
*AudioI/O
*M-Tune
Advanced Song Playback
Note:
The internal calendar must be set in
advance in order for the timer play
to function. See Chapter 2 "Getting
Started – Setting the Internal
Calendar" on page 16.
Note:
The control unit must be turned on
in advance in order for the timer
play to function. The timer play
cannot turn on/off the control unit.
Chapter
6
51