Brother Scanner Utility - Brother DCP 165C - Color Inkjet - All-in-One User Manual

Brother Scanner Utility

The Brother Scanner Utility is used to configure the WIA scanner driver for resolutions greater than 1200 dpi
and for changing the Maximum Scanning Size setting.
For Letter scanning models
If you want to set Legal size as the default size, check Legal in the Brother Scanner Utility dialog box. You
must restart your PC for the new settings to take effect.
For 11 x 17 scanning models
If you want to choose Tabloid or Legal size as the scan page size, check A3/Ledger in the Brother
Scanner Utility dialog box. You must restart your PC for the new settings to take effect.
Note
If you scan the document at a resolution of greater than 1200 dpi, the file size may be very large. Make
sure that you have enough memory and hard disk space for the size of the file you are trying to scan. If
you do not have enough memory or hard disk space then your PC may freeze and you could lose your file.
Running the utility
You can run the utility by clicking the Scanner Utility located in Start/All Programs/Brother/MFC-XXXX
menu (where XXXX is your model name)/Scanner Settings.
Scanning
2
2
48