Scan To Ftp Manual Method - Brother DCP 165C - Color Inkjet - All-in-One User Manual

Scan to FTP Manual Method

a
Load your document.
b
Press the (Scan) key.
c
Press Scan to FTP.
d
Press a or b to choose <Manual>.
Note
If there is no FTP Profile configured, skip d and go to e.
e
Press to choose Name for the FTP host address or IP Address for the FTP IP address.
f
Enter the FTP host address (for example ftp.example.com up to 60 characters) or the IP address (for
example 192.23.56.189).
Press OK.
g
Enter the destination folder (for example /brother/abc/, up to 60 characters).
Press OK.
h
Enter the username.
Press OK.
i
Enter the password.
Press OK.
j
Press d or c to choose Quality.
Press to choose Color 150 dpi, Color 300 dpi, Color 600 dpi, B/W 200x100 dpi or
B/W 200 dpi.
k
Press d or c to choose File Type.
Press to choose PDF or JPEG for color or gray scale documents and PDF or TIFF for B/W documents.
Note
If you are using the scanner glass of the machine, choose the document size.
• Press d or c to choose Glass Scan Size.
• Choose the document size you want.
l
Do one of the following:
If you want to start scanning, press Black Start or Color Start and go to m.
If you want to change the file name, go to n.
m
Press d or c to choose File Name.
Press a or b to choose a file name you want to use. Press Black Start or Color Start and go to o.
Note
If you want to change the file name manually, go to n.
Network Scanning (For models with built-in network support)
4
4
122