Pre-Scanning And Cropping A Portion Using The Scanner Glass - Brother DCP 165C - Color Inkjet - All-in-One User Manual

Note
By default, the scanner resolution can be set to a maximum of 1200 dpi.
If you want to scan at higher resolutions, use the Brother Scanner Utility. (See Brother Scanner Utility
on page 48.)

Pre-Scanning and cropping a portion using the scanner glass

The Preview button is used to preview an image for cropping any unwanted portions from the image. When
you are satisfied with the preview, click the Scan button in the Scan dialog box to scan the image.
a
Put the document face down on the scanner glass.
b
Choose Flatbed in the Paper source drop-down list (1).
Note
If your machine has no Auto Document Feeder (ADF), you do not need to specify the Paper source.
1 Paper source
2 Picture type
3 Adjust the quality of the scanned picture
4 Scanning area
c
Choose the picture type (2).
d
Click Preview.
The whole image is scanned into the PC and appears in the scanning area (4).
1
2
3
Scanning
4
46
2
2