Release The Scanner Lock - Brother MFC-8880DN Quick Setup Manual

4

Release the scanner lock

Push the lever in the direction shown to unlock the
a
scanner.
(The grey scanner lock lever is located at the back left
side, under the document cover b.)
1
5
Connect the power cord
and telephone line
IMPORTANT
DO NOT connect the interface cable yet.
a
Make sure that the machine power switch is off.
Connect the AC power cord to the machine.
b
Plug the AC power cord into an AC outlet. Turn
the power switch on.
4
c
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a modular wall socket.
2
IMPORTANT
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
WARNING
The machine must be grounded using an
earthed plug.
Since the machine is grounded through the
power outlet, you can protect yourself from
potentially hazardous electrical conditions on
the telephone network by keeping the power
cord connected to your machine when you
connect it to a telephone line. Similarly, you
can protect yourself when you want to move
your machine by disconnecting the telephone
line first and then the power cord.