Saving Camera Settings (All Reset) - Olympus D630 - CAMEDIA D 630 Zoom Digital Camera Advanced Manual

Saving camera settings (ALL RESET)

This function lets you choose whether or not to save the current camera
settings after the power is turned off. The settings affected by [ALL
RESET] are listed below.
The [ALL RESET] setting ([ON]/[OFF]) applies to all modes. It applies
whether the camera is in shooting mode or playback mode.
ON All settings are returned to the factory default settings after the power is
turned off.
Example: If [ALL RESET] is set to [ON] and [K] is changed to [SQ1],
OFF The settings made before the power is turned off are saved.
However, each setting such as record mode and flash setting will return to
the factory default setting with a shooting mode other than [PROGRAM
AUTO] or [MOVIE].
Top menu [MODE MENU]
1
Select [OFF] or [ON], and press Z.
6
Note
• The settings in the [SETUP] tab in the [MODE MENU] ([ALL RESET], [W],
etc.) are saved even when [ALL RESET] is set to [ON].
(Functions that return to default settings when [ALL
RESET] is set [ON].
Function
F
FLASH MODE
&
METERING
ISO
f
DIGITAL ZOOM
K
WB
INFO
68
[K] returns to the factory default setting ([HQ]) when the
camera is turned on again.
[SETUP]
0.0
AUTO
OFF
4
AUTO
P
OFF
HQ
AUTO
OFF
[ALL RESET]
g"How to use the menus" (P. 15)
Factory default setting Ref. page
P. 47
P. 39
P. 38
P. 49
P. 50
P. 33
P. 37
P. 25
P. 48
P. 62