How to use the shooting button and playback button
(Turning the camera on in playback mode
With the camera off, press $.
• The camera turns on in playback mode. The last picture taken is displayed on the
1
monitor.
POWER switch
(The lens is retracted.
To turn the camera off
→ Press the POWER switch. The monitor and the lamp on the camera turn off.
To enable shooting mode
→ Press #. The lens extends, and shooting mode is enabled. Press $ to return to
playback mode. The lens remains extended.
Note
• When the power is turned on, sometimes the monitor flashes before displaying
the picture. This is not a malfunction.
• When the camera has turned on by pressing $, the camera with playback
mode automatically stops operating and turns off after about 15 minutes of non-
operation. Turn on the camera again.
10
(The monitor turns on.
$
Playback button (
Shooting button (
(The lamp lights green.
)
#
)