Install Feature License - Xerox DocuPrint 180 Configuration Manual

Install Feature License

XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Two commands are available to facilitate licensing. Use the Install
Feature License command if you will install the license by entering
information at the user interface. Use the Install FlexLicense from
Floppy command if you will install the license by using licensing
information on a key diskette.
Note: In most cases, the licensing procedure will be performed by
a Xerox representative. In the event that you assist with loading, the
license information will be provided to you via one of the following
methods: e-mail, fax, telephone, or floppy.
Use the Install Feature License command to install the license by
entering information at the user interface.
Access level Administrator
Syntax Install Feature License <Name> <Expiration Date> <Key> <IOT
Serial No> <HostID>
Arguments <Name>
Name of the package to be licensed. For example,
XRX_iotdiag_basic unlocks the basic diagnostics package for
the Model 180. The license name is case-sensitive and must
be entered exactly as provided.
<Expiration Date>
Date the license for your package expires. For example, 07-
Mar-2023.
<Key>
Alphanumeric string used to unlock the package. This number
is unique for your system's host ID. An example of the key is:
XX64FA01XF3EC528X917
<IOT Serial No>
Serial number for your printer (IOT). Used only for diagnostic
licensing, but not for NPS or VIPP software licensing. An
example of the IOT serial number is:7800205. The number of
digits in the serial number will vary depending on the country.
<HostID>
Host ID for your system in hex, as displayed using the Show
HostID command. An example of a Host ID number is
8088871e. The system will insert this number automatically.
The following example shows license strings for DocuPrint IPS and
NPS software, as well as value-added diagnostics for a model 180.
USING UTILITY COMMANDS
2-9