Nortel 252 Fundamentals page 30

30 Chapter 4 Configuring your Business Secure Router
.
4
Enter the IP address of your Business Secure Router in dotted decimal
notation in the LAN IP Address field. For example, 192.168.1.1 (factory
default).
Note: If you change the Business Secure Router's LAN IP address, you must
use the new IP address if you want to access the WebGUI again.
Enter a subnet mask in dotted decimal notation in the LAN Subnet Mask field.
From the DHCP Server drop-down list box, select Server to allow your Business
Secure Router to assign IP addresses, an IP default gateway and DNS servers to
computer systems that support the DHCP client. Select Relay to have the
Business Secure Router forward DHCP requests to another DHCP server. When
set to Relay, fill in the DHCP Server Address field.
Select None to stop the Business Secure Router from acting as a DHCP server.
When you select None, you must have another DHCP server on your LAN, or else
the computers must be manually configured.
When DHCP server is used, set the following items:
NN47923-301