Nortel 252 Fundamentals page 25

From the Mode drop-down list box, select Routing (default) if your ISP allows
multiple computers to share an Internet account. Otherwise select Bridge.
Select the encapsulation type your ISP uses from the Encapsulation drop-down
list box. Choices vary depending on what you select in the Mode field.
Select the multiplexing method used by your ISP from the Multiplex drop-down
list box.
Enter the correct Virtual Path Identifier (VPI) and Virtual Channel Identifier
(VCI) numbers supplied by your ISP in the VPI and VCI fields. These fields may
already be configured.
Click Next.
2
The second wizard screen varies depending on what mode and encapsulation
type you use. All screens shown are with routing mode. Configure the fields
and click Next to continue.
Chapter 4 Configuring your Business Secure Router 25
Nortel Business Secure Router 252 — Fundamentals