Adjusting Basic Settings - ViewSonic CDE6501LED User Manual

Adjusting Basic Settings

Adjusting basic settings
• OSD Language — Selects on-screen menus language.
• S/PDIF Output (digital only) — Selects the digital audio output mode for S/PDIF.
You can select Auto or PCM.
. Auto: This mode outputs Dolby Digital or PCM to the digital audio output jack
(S/PDIF) providing it is being broadcast.
. PCM: Select this when a 2ch digital stereo amplifier is connected to the Display.
When you select a Dolby Digital or MPEG audio track, the sound is converted to
the PCM (2ch) format and output.
• Judder Adjustment — When viewing programs, picture problems such as Blur
and Judder may occur, and different programs have different amount of Judder. The
Judder Adjustment option will help you correct this picture problem by reducing
the amount of judder on your Display. You can select Weak/Normal/Strong that
suits your taste, select Off to turn off this feature.
. Weak: Select for news programs or similar programs.
. Normal: Select for movie or general programs.
. Strong: Select for sports programs.
• Note: Judder Adjustment is available only under certain formats. Sometimes it will
be turned off automatically when some OSD displays on the screen, then restore
automatically when the OSD disappears.
• Audio Only — When listening to MP3 music (through USB music play), you
can set Audio Only to Power Saving for energy save. The backlight will turn
off automatically after some seconds. Select Normal then the backlight works
normally.
4
To close the menu, press EXIT button.
To adjust basic settings:
1
Press MENU. The on-screen menu
opens
2
Press or to display OPTION menu,
press to access.
3
Press or
press or to adjust the option. If a
sub-menu exists, press OK to access,
then use
18
to select an option,
to select and adjust.