Table of Contents
Advertisement
To purchase the full language guide, go to
http://www.garmin.com/languageguide.
Selecting Languages in the Language Guide
You can select the languages you want to translate when
translating words and phrases.
1
Select Apps > Language Guide.
2
Select
> Language.
3
Select From, select the language to translate from, and
select Save.
4
Select To, select the language to translate to, and select
Save.
Translating Words and Phrases
1
Select Apps > Language Guide.
2
Select a category and subcategories.
3
If necessary, select
, enter a keyword, and select Done.
4
Select a word or a phrase.
5
Select
to listen to the translation.
Using a Bilingual Dictionary
1
Select Apps > Language Guide > Bilingual Dictionaries.
2
Select a dictionary.
3
If necessary, select
, enter a word, and select Done.
4
Select a word.
5
Select
to listen to the translation.
About Traffic
Garmin is not responsible for the accuracy or timeliness of the
traffic information.
Traffic information may not be available in all areas or countries.
For information about traffic receivers and coverage areas, go
to www.garmin.com/traffic.
A traffic receiver is included in some packages, built into either
the vehicle power cable or the device, and is an optional
accessory for all models.
• The device must be connected to vehicle power to receive
traffic information.
• The powered traffic receiver and the device must be in data
range of a station transmitting traffic data to receive traffic
information.
• You do not need to activate the subscription included with
your traffic receiver.
•
changes color to indicate the severity of traffic conditions
on your route or on the road you are currently traveling.
• If your device includes an external traffic antenna, you
should always leave the external antenna plugged in for the
best traffic reception.
Receiving Traffic Data
Heated (metallized) windshields could degrade the performance
of the traffic receiver.
Before you can receive traffic data, you must purchase a
compatible Garmin traffic receiver accessory. Go to
www.garmin.com
for more information.
Before you can receive traffic data, the traffic receiver and the
device must be in data range of an FM station transmitting
traffic information.
About Traffic
NOTICE
NOTICE
When the receiver is within a traffic coverage area, your device
will begin displaying traffic information.
1
Connect the traffic receiver to an external power source.
2
Connect the traffic receiver to the device.
Traffic Receiver
Mini-USB connector
External antenna connector
Internal antenna
Power LED
Vehicle power adapter
About the Traffic Icon
When you are receiving traffic information, a traffic icon appears
on the map. The traffic icon changes color to indicate the
severity of traffic conditions.
Gray: Traffic information is not available.
Green: Traffic is flowing freely.
Red: Traffic is not moving or moving very slowly. There is a
severe delay.
Yellow: Traffic is moving, but there is a delay. There is
moderate traffic congestion.
Positioning the Traffic Receiver
You can position the traffic receiver power cable for optimal
traffic reception.
1
Uncoil the cable.
2
Place the middle of the cable in a location with an
unobstructed view of the sky, such as the dash.
NOTE: Do not rest the cable on the cable plug that connects
to the vehicle power source.
Do not place the cable on the floor or underneath other
objects.
Traffic on Your Route
When calculating your route, the device examines the current
traffic and automatically optimizes the route for the shortest
time. If a severe traffic delay occurs on your route while you are
navigating, your device automatically recalculates the route.
The traffic icon
changes color to indicate the severity of
traffic conditions on your route or on the road you are currently
traveling.
Your device may route you through a traffic delay if a better
alternative route does not exist. The delay time is added into
your estimated time of arrival automatically.
Viewing Traffic on Your Route
1
While navigating a route, select
2
Select Traffic on Route.
A list of traffic events appears, organized by their location on
the route.
3
Select an event.
Manually Avoiding Traffic on Your Route
1
From the map, select
2
Select Traffic on Route.
3
If necessary, use the arrows to view other traffic delays on
your route.
.
.
13
Hide quick links:
Advertisement
Table of Contents
