Connecting A Computer; Using Your Tv; Turning Your Tv On And Off - Insignia NS-LCD15-09CA User Manual

Insignia NS-LCD15-09CA 15" LCDTV 720P
For HDMI—Plug one end of an HDMI cable
into the HDMI (1) jack on the back of your TV,
then plug the other end into an HDMI device.
2 Turn on your TV.
3 Press INPUT to open the input source menu,
press or
source you want to watch, then press
ENTER.
4 Turn on the external signal source.
5 Insert a disc or videotape into the external
signal source, then press PLAY.

Connecting a computer

You can connect a computer using the HDMI or
VGA jack on the back of your TV.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
"wake" your computer, press the POWER button
on your TV or remote control.
4
5
to select the external signal
www.insignia-products.com
To connect a computer using VGA:
1 Plug a VGA cable from your computer into
the VGA jack on the back of your TV.
6
2 Plug an audio cable from your computer's
audio out jack into the AUDIO jack on the
back of your TV.
3 Plug in and turn on your TV.
4 Press INPUT to open the input source menu,
press
ENTER.
To connect a computer using HDMI:
• Plug an HDMI cable into the HDMI INPUT
jack on the back of your TV and into the
HDMI Out jack on the back of the computer.

Using your TV

Turning your TV on and off

To turn your TV on and off:
1 Make sure that the power cord is connected
to your TV and a power outlet.
2 Press
indicator LED turns blue.
3 Press
The power indicator LED turns red.
VGA cable Audio cable
or to select VGA, then press
to turn on your TV. The power
again to return your TV to standby.
7