Features; Front; Remote Control - Insignia NS-LCD15-09CA User Manual

Note to CATV system installer
This reminder is provided to call the CATV
system installer's attention to Article 820-40 of
the NEC that provides guidelines for correct
grounding and in particular, specifies that the
cable ground must be connected to the
grounding system of the building as close to the
point of cable entry as practical.
Mobile telephone warning
To avoid interference with your TV picture and
sound, operating problems, or even damage,
keep your cordless or cellular telephones away
from the TV.

Features

Front

# Button Description
1 VOL+ Press to increase the volume. In Menu
mode, functions as the right arrow to
go to the next menu or increase a
setting.
2 VOL– Press to decrease the volume. In Menu
mode, functions as the left arrow to go
to a previous menu or decrease a
setting.
3 Press to go to the next higher channel.
CH
In Menu mode, functions as the up
arrow.
4 Press to go to the next lower channel.
CH
In Menu mode, functions as the down
arrow.
5 MENU Press to open the on-screen menu.
6 INPUT Press to open the input source menu,
press CH
source, then press VOL+ or VOL– to
switch to the input source you
selected.
7 POWER Press to turn on your TV or put it into
Standby mode.
4
or CH to select an input
www.insignia-products.com
Insignia NS-LCD15-09CA 15" LCDTV 720P

Remote control

4
5
6
7
8
9
10
11
12
13
14
15
16
17
# Button Description
1 Press to turn on your TV or put it into
POWER
Standby mode.
2 INPUT Press to select the video input source.
For more information, see "Selecting
the TV video source" on page 8.
3 DISPLAY Press to display status information.
4 VIDEO Press to toggle between S-Video and
composite video input source modes.
5 Numbers Press to enter channel numbers.
In the on-screen menu, press to enter
the parental control password.
6 VGA Press to select a connected computer
as the video input source.
7 VOL+ Press to increase the volume.
8 MUTE Press to turn off the sound. Press
again to turn the sound back on.
9 VOL– Press to decrease the volume.
10 ZOOM Press to select the aspect ratio. You
can select Normal, Wide, Zoom, or
Cinema.
In VGA mode, you can select Normal
or Wide.
11 MENU Press to open the on-screen menu.
18
19
20
21
22
23
24
25
26
27
28