Table of Contents
Advertisement
Provisioning Cisco Small Business VoIP
Devices
Small Business and Residential Deployment Provisioning
Cisco Small Business IP Telephony Devices Provisioning Guide
This chapter describes the features and functionality available when provisioning
Cisco Small Business IP Telephony devices and explains the setup required. It
includes the following sections:
•
Small Business and Residential Deployment Provisioning, page 10
•
Provisioning Overview, page 12
•
Configuration Access Control, page 16
•
Using HTTPS, page 19
•
Provisioning Setup, page 23
•
Where to Go From Here, page 29
Cisco Small Business IP Telephony devices are intended for high-volume
deployments by VoIP service providers to residential and small business
customers. Typically, these devices are widely distributed across the Internet,
connected through routers and firewalls at the customer premises. Further, IP
Telephony devices can serve as terminal nodes in business or enterprise
environments, where the units can be operated in a LAN environment.
The IP Telephony device can be used as a remote extension of the service
provider back-end equipment. Remote management and configuration ensures
the proper operation of the IP Telephony device at the customer premises.
Device configuration varies according to the individual customer and with the
same customer over a period of time. Also, the configuration might be modified to
provision new features, support modifications in the service provider network, or
deliver firmware upgrades to the endpoint.
1
7
Advertisement
Table of Contents
