2. Windows KX Driver
2-2-1 Custom Paper Size dialog box
I Setting a custom paper size
Perform the following procedure in order to register a custom size when you want to print onto a non-standard size of paper. The
information registered here will be displayed under the "Page Size" setting in the Media Tab as well as in the Paper Size setting of your
application.
If you want to register a new custom paper size, click on the "Add" button. The "Edit
1
Paper Size" dialog box will appear.
If you want to change a previously registered paper size, click on the registered
size to select it and then click on the "Edit" button.
If you want to delete a registered paper size, click on the desired size to select it
and then click on the "Remove" button.
Type into the "Name" field the name you want to use for this custom size of paper.
2
* It is the name that you register here that will actually be displayed under the
"Page Size" setting.
Select the desired unit of measurement in the "Units" block and the desired
3
dimensions of the paper in the "Size" block.
<Available settings>
Units: "Inches" or "Millimeters"
Height: 5.83 – 17.00 [Inches]
148.0 – 431.8 [Millimeters]
Width: 3.15 – 11.69 [Inches]
80.0 – 297.0 [Millimeters]
Click on the "OK" button. The "Custom Paper Sizes" dialog box will appear once
4
again.
Click on the "OK" button.
5
2-3