Turning Off the Power
1
Press the ?/1 key on the main unit or
the 1 key on the Remote Commander.
The message appears if you press the
1
key on the main unit. Press it again
according to the message.
2
Unplug the AC power cord from the
wall outlet.
After step 1, the fan continues to run for
a while to reduce internal heat. You may
unplug the AC power cord before the fan
stops.
To erase the confirmation message
The message disappears if you press any key
?/1
other than the
key on the Remote Commander, or if you do
not press any key for a while.
To turn off the power with the key
on the main unit without a
confirmation message being
displayed
?/1
Hold the
key on the main unit pressed
for a few seconds.
14
Projecting an Image
key on the main unit or
?/
1