Onboard Device Configuration - Asus M4A785TD-V EVO - Motherboard - ATX User Manual

The following item appears when you set the Internal Graphics Mode item to [UMA]
UMAFrame Buffer Size [Auto]
Allows you to select the UMA Frame Buffer size. Configuration options: [Auto] [32MB]
[64MB] [128MB] [256MB]
The following item appears when you set the Internal Graphics Mode item to [SlidePort]
SlidePort Clock Speed [DDR3-1333 MHz]
Allows you to select the SlidePort Clock speed. Configuration options: [DDR3-1333
MHz] [DDR3-1400 MHz] [DDR3-1430 MHz] [DDR3-1460 MHz] [DDR3-1490 MHz]
[DDR3-1520 MHz] [DDR3-1550 MHz] [DDR3-1580 MHz] [DDR3-1610 MHz] [DDR3-
1640 MHz] [DDR3-1670 MHz] [DDR3-1700 MHz]
SP OverVoltage [1.5V]
Allows you to set the SidePort over voltage. Configuration options: [1.5V] [1.6V]
Surround View [Auto]
Allows you to disable or enable the Surround View function. Configuration options: [Auto]
[Disabled] [Enabled]
This item becomes user-configurable when you install an ATI graphics card into the
PCIe x16 slots.
Frame Buffer Location [Above 4G]
Configuration options: [Below 4G] [Above 4G]
AMD 785 HDMI Audio [Enabled]
Allows you to enable or disable AMD 785 HDMI audio. Configuration options: [Enabled]
[Disabled]
2.4.4

Onboard Device Configuration

Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options: [Disabled]
[3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378]
[278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode. Configuration options: [Normal] [EPP] [ECP]
[EPP+ECP]
Parallel Port IRQ [IRQ7]
Configuration options: [IRQ5] [IRQ7]
2-14 Chapter 2: BIOS information