3.4.2
AI NET 2
This menu displays the status of the Local Area Network (LAN) cable connected to
the LAN (RJ-45) port.
Advanced
AI NET 2
Pair
Status
1-2 N/A
Marvell Controller 0
3-6 N/A
4-5 N/A
7-8 N/A
Marvell POST Check LAN cable [Disabled]
Marvell POST Check LAN cable [Disabled]
Allows you to enable or disable LAN cable check during POST. When enabled, the
menu reports the cable faults or shorts, and displays the point (length) where the
faults or shorts are detected. Configuration options: [Disabled] [Enabled]
3-22
BIOS SETUP UTILITY
Length
Check Realtek LAN
cable during POST.
Chapter 3: BIOS setup