Asus M3A79-T Deluxe - Motherboard - ATX User Manual page 52

4. AMD SB750 Southbridge Serial ATA connectors (7-pin SATA1–6)
®
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
and optical disk drives.
If you install SATA hard disk drives to the SATA1
create a RAID 0, RAID 1, RAID 5 or RAID 10 configuration through the
onboard AMD
These connectors are set to [IDE] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the Onchip SATA Type item in the BIOS
to [RAID].
Important note on Serial ATA
Install the Windows
•
•
2-26
SB750 controller.
®
XP Service Pack 1 before using Serial ATA.
®
For detailed instructions on how to configure RAID 0, RAID 1, RAID 5 and
RAID 10, refer to the RAID manual in the support DVD.
If you intend to create a Serial ATA RAID set using these connectors, set
the Onchip SATA Type item in the BIOS to [RAID].
connectors, you can
–6
Chapter 2: Hardware information