Table of Contents
Advertisement
3.1.5
ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore
the BIOS file when it fails or gets corrupted during the updating process. You can
update a corrupted BIOS file using the motherboard support DVD or the floppy disk
that contains the updated BIOS file.
•
•
Recovering the BIOS from the support DVD
To recover the BIOS from the support DVD:
1.
Turn on the system.
2.
Insert the motherboard support DVD to the optical drive.
3.
The utility displays the following message and automatically checks the DVD
for the BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
When found, the utility reads the BIOS file and starts flashing the corrupted
BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file "M3A79-T.ROM". Completed.
Start flashing...
4.
Restart the system after the utility completes the updating process.
Recovering the BIOS from a floppy disk
To recover the BIOS from a floppy disk:
1.
Insert the floppy disk that contains BIOS file to the floppy disk drive.
2.
Turn on the system.
3.
The utility will automatically checks the devices for the BIOS file. When found,
the utility reads the BIOS file and starts flashing the corrupted BIOS file.
4.
Restart the system after the utility completes the updating process.
DO NOT shut down or reset the system while updating the BIOS! Doing so can
cause system boot failure!
3-8
Prepare the motherboard support DVD or the floppy disk containing the
updated motherboard BIOS before using this utility.
Make sure that you rename the original or updated BIOS file in the floppy
disk to M3A79-T.ROM..
Chapter 3: BIOS setup
Hide quick links:
Advertisement
Table of Contents
