Onboard Devices Configuration - Asus M3A GREEN User Manual

2.4.6

Onboard Devices Configuration

Advanced
Onboard Devices Configuraiton
Serial Port1 Address
HD Audio Azalia Device
Front Panel Support Type
Onboard Attansic L1 Lan
Onboard Attansic L1 LAN Boot [Disabled]
Primary Display Adapter
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
HD Audio Azalia Device [Auto]
Allows you to enable or disable the High Definition Audio. The following item
appears only when you set this item to [Auto].
Configuration options: [Auto] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
Configuration options: [AC97] [HD Audio]
Onboard Attansic L1 Lan [Enabled]
Configuration options: [Enable] [Disabled]
Onboard Attansic L1 Lan Boot Rom [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Enable] [Disabled]
Primary Display Adapter [PCI-E]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [PCI-E] [PCI] [Onboard]
2-28
[3F8/IRQ4]
[Auto]
[HD Audio]
[Enabled]
[PCI-E]
Allows BIOS to Select
Serial Port1 Base
Addresses.
Chapter 2: BIOS setup