Installing The Retension Module Base - Asus KCMA-D8 User Manual

2.3.2

Installing the retension module base

You may need to install the retension module base on the motherboard before
installing a CPU heatsink and fan assembly.
To install the retension module base:
1. Locate the two screw stands beside
the CPU socket.
2. Place one retension module on the
screw stand.
3. Use the screw that comes with
the retension module to secure
the retension module to the
motherboard.
4. Repeat steps 2 to 3 to install the
other retension module to the
motherboard.
ASUS KCMA-D8 2-13