Asus KCMA-D8 User Manual page 132

Red Hat Enterprise Linux OS 5.0
®
To install the RAID controller driver when installing Red Hat
1. Boot the system from the Red Hat
2. At the boot:, type linux dd
3. Press <Enter>.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd
Select Yes using the <Tab> key when asked if you have the driver disk, then
4.
press <Enter>.
Do you have a driver disk?
Yes
5. Insert the Red Hat
OK, then press <Enter>.
Insert your driver disk into /dev/fd0
and press "OK" to continue.
The drivers for the RAID card are installed to the system.
6-10
Main Menu
No
Enterprise RAID driver disk to the floppy disk drive, select
®
Insert Driver Disk
OK Back
OS installation CD.
®
Chapter 6: Driver installation
Enterprise OS:
®