Security - Asus K8V-XE User Manual

K8v-xe user's manual for english edition
Hide thumbs Also See for K8V-XE:
Table of Contents

Advertisement

OS Select for DRAM > 64MB [Non-OS2]
Set this item to OS2 only when you are running on an OS/2 operating system with
an installed RAM of greater than 64 KB. Configuration options: [Non-OS2] [OS2]
Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature. Configuration
options: [Disabled] [Enabled]
Make sure that the above item is set to [Enabled] if you want to use the ASUS
MyLogo™ feature.
Halt On [All, But Keyboard]
Allows you to error report type.
Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But Diskette]
[All, But Disk/Key]
2.6.5

Security

Boot Settings Configuration
Supervisor Password
User Password
Password Check
Supervisor Password
User Password
These fields allow you to set passwords:
To set a password:
1. Select an item then press <Enter>.
2. Type in a password using a combination of a maximum of eight (8) alpha-
numeric characters, then press <Enter>.
3. When prompted, confirm the password by typing the exact characters again,
then press <Enter>. The password field setting is changed to Set.
ASUS K8V-XE motherboard
Phoenix-Award BIOS CMOS Setup Utility
Boot
Clear
Clear
[Setup]
Select Menu
Item Specific Help
Supervisor password
controls full access,
<Enter> to change
password.
2-33

Advertisement

Table of Contents
loading

Table of Contents