Table of Contents
Advertisement
4. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
devices. The current Serial ATA I interface allows up to 150 MB/s data transfer
rate while Serial ATA II allows up to 300 MB/s data transfer rate, faster than the
standard parallel ATA with 133 MB/s (DMA/133).
K8V -XE
R
K8V-XE SATA Connectors
5. Digital Audio connector (4-1 pin SPDIF_OUT)
This connector is for the S/PDIF audio module to allow digital sound output.
Connect one end of the S/PDIF audio cable to this connector and the other
end to the S/PDIF module.
K8V -XE
R
K8V-XE Digital Audio Connector
The S/PDIF out module is purchased separately.
1-24
SATA4
SATA2
SATA3
SATA1
SPDIF_OUT
Chapter 1: Product introduction
Advertisement
Table of Contents
