Table of Contents
Advertisement
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items Date (of Month) and Resume Time (hh:mm:ss) become
configurable with set values. Configuration options: [Disabled] [Enabled]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more than 4
seconds. Configuration options: [Suspend] [Instant-Off]
2.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. Select an item then press <Enter> to display the
configuration options.
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU Fan speed
Chassis Fan speed
CPU Fan Speed warning
F1:Help
↑↓ : Select Item
ESC: Exit
→←: Select Menu
ASUS K8V-XE motherboard
Phoenix-Award BIOS CMOS Setup Utility
Power
Hardware Monitor
[
[
[
[ 11.71V]
57ºC
35ºC
4265 RPM
[ 800 RPM]
-/+: Change Value
Enter: Select Sub-menu
1.64V]
Item Specific Help
3.24V]
5.21V]
Press
0 RPM
Select Menu
[Enter] to set.
F5: Setup Defaults
F10: Save and Exit
2-29
Advertisement
Table of Contents
