Asus K8V-XE User Manual page 60

Advanced
Current DRAM Frequency
Timing Mode
x Memclock index value (Mhz)
x CAS# latency (Tcl)
x Min RAS# active time(Tras)
x RAS# to CAS# delay
x Row precharge Time
x 1T/2T Memory Timing
MTRR mapping mode
F1:Help
ESC: Exit
Current DRAM Frequency
Shows the Transfer mode. This item is not configurable.
Timing Mode [Auto]
Sets the timing mode. Configuration options: [Auto] [Manual]
Memclock index value (Mhz)
Shows the memory clock index value. This item is not configurable.
CAS# latency (Tcl)
Shows the latency between the SDRAM read command and the time the data
actually becomes available.This item is not configurable.
Min RAS# active time (Tras)
Shows the minimum RAS# active time. This item is not configurable.
RAS# to CAS# delay (Trcd)
Shows the latency between the DDR SDRAM active command and the read/
write command. This item is not configurable.
Row precharge Time (Trp)
Shows the Row precharge time.This item is not configurable.
1T/2T Memory Timing
Shows the memory timing. This item is not configurable.
MTRR mapping mode [Continous]
Sets the MTRR mapping mode.
Configuration options: [Continous] [Discrete]
2-22
Phoenix-Award BIOS CMOS Setup Utility
DRAM Configuration
(Trcd)
(Trp)
↑↓ : Select Item
→←: Select Menu
200 MHz
[Auto]
200Mhz
2.5
8T
4T
4T
1T
[Continous]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
<Enter> to select DARM
configuration by
[Auto] is recommended.
[Manual] allows you to
set each
configuration on your
own.
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS Setup